Dendroboard banner

1 - 20 of 214 Posts

·
Registered
Joined
·
73 Posts
Discussion Starter #1 (Edited)
Island Paludarium 360° A to Z - 185 Gal - 40" x 40" x 28"

Good day to Europe, I am French more precisely, i'm 26 (in advance thank you to forgive me for my English aproximatif, I use an online translator). :rolleyes:

I developed a certain passion for the world of paludariums, I love to imagine and create sets each time different and unique. Thank you to nature for inspiration innépuisable she gives me every time.

I have long wanted to share my creations. I am the author of the project entitled "Waterfall Paludarium" you may have seen on youtube also :
Here is my blog for more details on its construction : Waterfall Paludarium - Index

--------------------

And I now work for several months on a new project I titled Island Paludarium 360 °. I was eager to introduce him.


Presentation of the new Project

Project status : Under construction
Type : Paludarium
Size of the tank : 40" x 40" x 28"
NET volume of the tank : 185 Gallon
Closed : Yes
Materials : 8mm glass tank, gallery and wooden furniture OSB
Lightning : 100% LEDs 9x30W
Aeration : Two PC fans (12cmx12cm)
Irrigation : A pump 1300L/h for the system of rain
Cascade/waterfall : A pump 2000L/h
Wave system : Vibration pump 5000L/h
Fogger/mist : 3 Fogger in the waterfall
Type of water : 100% rainwater (not limestone)
Type of scene : Natural & Artificial : Natural Seychelles sand, polyurethane foam rocks covered with waterproof mortar and acrylic paint, driftwood branch, artificial vines
Plants : Terrestrial and epiphytic (gardenia, frangipani, vanilla, ferns, orchids, tillandsia, ficus, helxine, moss)
Planting technique/substrate : Felt geotextile (kept wet by rain system)
Animals : Land hermit crabs (Pagou), drosophila for the atmosphere "gnats", probably snails (Neritina), and can be Agalychnis callidryas and crickets
Height of water : 5 in or 35 gal
TOTAL weight : Approximately 550 lb (including water)
Next step : Getting water, system rain creation, waves, waterfall, and mist


For this third project is an island 360° that I will realize, the tank is glass 8mm thick and 100cm fully closed side, the Seychelles natural sand will form a small island strewn with boulders, covered vegetation, driftwood branches and vines falling from the ceiling fill the space, and will be covered with orchids and moss (lots of moss).

Side vegetation, I will try with specific plants such as frangipani with its beautiful yellow flowers and the famous Flower of Gardenia Tiare Tahitensis, as usual with a database of several varieties of ferns and orchids Vanilla is climbing).

A system of artificial climate will be set up to recreate the rain (and therefore the natural watering of all plants by this technique), the waves will also fail on the outskirts of the island through a pump vibration and the wind that will provide aeration and naturally move the foliage.

For lighting, we go for the 100% LED, ie "High power" of the 30W unit, there will 9x30W ... I would also like to thank kdj2 a parallel forum for his very constructive post on its tests of these LEDs. I left without him definitely on turbo neon. However I have not yet done so to test for these LEDs there, but it will spend the time comes.


Plants :
Frangipani Plumeria rubra Yellow, Gardenia Tahitensis "Tiare Flower", Orchid Vanilla planifolia,
A dozen mini Orchids varied Driopteris atrata Fern, Ficus Ginseng
Fern Polypodium vulgare, Blechnum fern spicant, Tillandsia Brachycaulus,
Tillandsia Butzii, Areca palm, Ficus punctata Helxine, moss.​
 

·
Registered
Joined
·
73 Posts
Discussion Starter #2 (Edited)
Re: Island Paludarium 360° A to Z - 185 Gal - 40" x 40" x 28"

3D modeling project

Place in 3D models, which will give you one idea on the whole project.
(All is not modeled, and I leave much of a surprise when the final result by excluding certain visual aspects in the modeling)...



The dimensions of the tank : 40" wide x 40" long x 28" high.
(The can serves as a marker size).

The wooden furniture and the gallery will be painted matt black, highlighted with golden finish corners.



In the gallery we see the 9 LED heat sinks, and two small fans (in the corners but not visible in photo) that will provide aeration of the tank and the effect of "light breeze on vegetation".



The islet, rocks, rain (which falls directly off the ceiling)
and a portion of the vines / branches, without the plant part.





Another view without rain.


To compare the volume that will take this new project, I have superimposed the previous "Waterfall Paludarium".
It is completely embraced in the new volume. Even go back there twice.



(The can serves as a marker size).




Superimposing the 3D tank at real size, in a picture to better understand the proportions.
 

·
Registered
Joined
·
73 Posts
Discussion Starter #3
Re: Island Paludarium 360° A to Z - 185 Gal - 40" x 40" x 28"

Creation of the Gallery

Wuhu, we go for the new Adventure!
After 9 months of preparation and mature reflection, I am ready to develop this third project.

Work began, I started assembling the gallery, here in the photo.



Painting gallery in black.

 

·
Registered
Joined
·
73 Posts
Discussion Starter #5 (Edited)
Re: Island Paludarium 360° A to Z - 185 Gal - 40" x 40" x 28"

Creation of the furniture

The furniture is now assembled, have yet to paint it.
I do not know if the dimensions make the same impression, but it's very ... BIG !



(The can serves as a marker size).







Painting the furniture black.



We can see the plate of extruded polystyrene installed on the furniture, to receive the tank.
I will create (later) two doors to close the furniture, or will install two small black curtains, I see.
 

·
Registered
Joined
·
73 Posts
Discussion Starter #6
Re: Island Paludarium 360° A to Z - 185 Gal - 40" x 40" x 28"

Creation of the Glass Tank

A large stage is passed, ouf !!! It is not easy this story .... But the tank is standing !!!



Silicone freshly put



There are more than wait until everything dries quietly in a week I do the water test.




Next step : Getting water, system rain creation, waves, waterfall, and mist

Following soon. :p
 

·
Registered
Joined
·
304 Posts
Re: Island Paludarium 360° A to Z - 185 Gal - 40" x 40" x 28"

Mark my words this will be the best vivarium created....

Good luck and I am glad you are sharing your new build.... I am pumped.
 

·
Registered
Joined
·
477 Posts
Re: Island Paludarium 360° A to Z - 185 Gal - 40" x 40" x 28"

Will be following this for sure!
I love the island style version.

Nice stand too! I was just trying to figure out what I should use as a stand for my exo, was thinking of building a stand and seeing that kind of helps :)
 

·
Registered
Joined
·
73 Posts
Discussion Starter #17
Re: Island Paludarium 360° A to Z - 185 Gal - 40" x 40" x 28"

Thanks you :)

Getting water

The seals of the tank having been much time to dry, it's time to put the water to start preparing the implementation of the various systems that generate the climate, and there to work !



No water leak was found so far.




Next step : System rain creation.

Following soon. ;)
 

·
Registered
Joined
·
123 Posts
Re: Island Paludarium 360° A to Z - 185 Gal - 40" x 40" x 28"

Whoa, what kind of fogger is that? Some sort of ultrasonic submersible fogger??
Could post a link. Crossing my fingers that its available in the US haha

-Jeremy
 

·
Registered
Joined
·
1,075 Posts
That's just an ultra sonic one jermey. Not the one by Exo terra though. It looks more like the one home depot or menards used to carry for ponds since it has lights on it
 
1 - 20 of 214 Posts
Top