[AQUAMAC]

I have started setting up a rack system with all our frogs and have decided to give making my own mist system a shot. At risk of sounding like a complete idiot..could someone please tell me an EXACT model and web site to locate a pump. I will be running about 20 nozzles on it. I've seen some other posts but when I go to look up 100 psi I get a bunch of car pumps and nothing even remotely close to what other people are posting. Thanks so much for your help.

-Mike C

 

[Guest]

I'm hardly qualified to answer any questions.. but since I've been going through the exact same process as you looking for that pump, to give you a head start with what I've been able to find out: Try "Shurflo" pumps part # 8030-863-239. This is a low flow high pressure pump (150psi) that runs on 110V (instead of 12V or 24V, the 8000 prefix will have a slightly different number depending on the power supply and near as I can figure 8030 means 110VAC).

Hope this helps.

 

[Guest]

Here:
http://www.shurflo.com/pages/new_indust ... 3-239.html

 

[AQUAMAC]

Thanks very much for both your help. One more question...can I order from the site that you gave me or would I have to order it?

Thanks again,

Mike

 

[Guest]

I don't think so, but they have a dealership lookup page somewhere organized by state so you should be able to hopefully find someone close to where you are. I was able to find someone in my area. 8)

 

[rmelancon]

The prices listed are for DC I believe, AC is more expensive.

http://www.sprayingequipmentsupply.com/pumps/diaphragm-pump.html

 

[steelcube]

How's the noise on this pump??

I have heard some complains about the big apple misting pump's...


SB

 

[steelcube]

bump

 

[Darks!de]

Yeah, also wondering about the noise for these pumps...