Dendroboard banner
1 - 4 of 4 Posts

· Registered
20 Posts

If you install the bulkhead on the side you would have to leave enough room for a nut. That's likely to be at least 1/4". So if you install on the side you're going to have about 1/4" reservoir. Depending on the bulkhead you use it could be just about the same if you install it in the bottom.

There is no false bottom. There is only sphagnum moss on the bottom so it needs to drain fast. What do you recommend?

1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.