Dendroboard - View Single Post - turn a non sliding class tank to a sliding glass?crazy?

Go Back   Dendroboard
Register Blogs FAQ Calendar Mark Forums Read Advertise

Support Our Sponsors


View Single Post
  #4 (permalink)  
Old 08-28-2009, 04:52 AM
IN2DEEP IN2DEEP is offline
Join Date: Aug 2007
Location: near Daytona Beach
Posts: 158
Thanks: 1
Thanked 3 Times in 2 Posts
Default Re: turn a non sliding class tank to a sliding glass?crazy?

Why don't you get a premade tank or XXL Exo-terra. I cut a hole in the side of my hex tank. If I ever did it again, and I seriously mean IF! I would drill the corners with a small diamond hole saw (ebay). I used a Dremel and 3 bits and modeling clay to make trough for water. To make a 9"x11" hole and it only took me like 5 hours and 6 beers. The dangerous part is the glass your cutting out, at the very end it will drop. Possibly cracking the pane or falling into the tank. Mine got a minute crack as the glass dropped like 3/8".
Reply With Quote
Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 06:03 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.