Dendroboard - View Single Post - I know this is a big topic on here I’ve been going over it for the last few dats just

Go Back   Dendroboard
Register Blogs FAQ Calendar Mark Forums Read Advertise

Support Our Sponsors
No Threads to Display.


View Single Post
  #4 (permalink)  
Old 09-14-2020, 07:55 PM
kimcmich kimcmich is offline
Join Date: Jan 2016
Location: Berkeley CA
Posts: 846
Thanks: 4
Thanked 132 Times in 122 Posts
Default Re: I know this is a big topic on here Iíve been going over it for the last few dats


Open your viv and let it dry out for a day - this will set-back the mold. Then slowly re-moisten the viv making sure not to leave it wet (which will encourage the mold to return). Hopefully if you keep things drier the mold will stay better in check. This is not a guarantee, however.

Ideally you should have waited longer after setup to get your frogs - for exactly this reason. New setups take time to stabilize and mold problems are a pretty frequent issue after a new setup (especially until you get your watering/moisture level right).
Reply With Quote
Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 03:20 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.