After coming back I did some more sanding with 320 grit paper and then it was time to add the feet.
These are non-marking rubber feet that will serve the dual purpose of keeping the stand from rocking on my definitely not quite flat floor and also allow me to push the stand around without scratching the floor.
After this I finally attached the doors to the frame. The hinges I am using have some ability to adjust the door height and angle after it is attached which is pretty spiffy. Here is how they looked:
All that was left at this point is to move it into the house and put on the top.
Done!.........................with the stand ;P
Now I need to actually build the vivarium that goes on top heh. First step will be to make a 3d model which I will hopefully work on today.