Dendroboard - View Single Post - Schluter Kerdi-board

Go Back   Dendroboard
Register Blogs FAQ Calendar Mark Forums Read Advertise

Support Our Sponsors
No Threads to Display.


View Single Post
  #7 (permalink)  
Old 05-21-2020, 01:18 PM
minorhero's Avatar
minorhero minorhero is online now
Join Date: Apr 2020
Location: Maryland
Posts: 118
Thanks: 5
Thanked 4 Times in 4 Posts
Default Re: Schluter Kerdi-board

Originally Posted by Encyclia View Post
Especially when you figure in the learning curve for cutting glass :-) If you go the cutting route, I would recommend trying to pick up a couple of pieces of scrap glass to practice on. Or...maybe I am just really bad at it!

I learned from doing the frog cube conversion that buying the right tool is crazy important. The cheapy tool they sell at lowes is basically worthless. You need one with an oil resevoir. Anyway I would recommend not cutting it yourself if planning to save money. Don't buy it unless your hardware store will cut it for you.
Reply With Quote
Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 08:36 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.