Dendroboard - View Single Post - Pair Of 80 Gallon Plywood Builds

Go Back   Dendroboard
Register Blogs FAQ Calendar Mark Forums Read Advertise

Support Our Sponsors
No Threads to Display.


View Single Post
  #16 (permalink)  
Old 02-06-2020, 09:46 PM
jgragg jgragg is offline
Join Date: Nov 2009
Posts: 611
Thanks: 0
Thanked 92 Times in 88 Posts
Default Re: Pair Of 80 Gallon Plywood Builds

Thanks very much for the info. I will need to get some Pond Armor and play with it, once my current 2-g kit of 307 putty is all gone. To use a term like "epoxy" is a slippery thing - there's a zillion different ones, all with different properties. I can easily see an aquaculture outfit coming up with a formulation that plays well with silicone.

One thing I've learned about the 307 - Gorilla Glue doesn't stick to it, either. Not once the epoxy is cured, even if I scuff the hell out of it. One build, I tried using GG to put up some perches; they came down quick, just with gravity. Now I always screw & glue my perches, using epoxy putty as my adhesive/filler and still using a good scuff of the cured side. And of course, the screw on each end helps overcome gravity.

thanks again
Reply With Quote
Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 01:39 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.