Dendroboard - View Single Post - Another newbie mistake- exo Terra doors
Dendroboard

Go Back   Dendroboard
Register Blogs FAQ Calendar Mark Forums Read Advertise

Support Our Sponsors
No Threads to Display.

facebook

View Single Post
  #5 (permalink)  
Old 01-17-2020, 04:46 PM
hannamaxgracie hannamaxgracie is offline
Junior Member
 
Join Date: Jan 2020
Location: Iowa
Posts: 28
Thanks: 4
Thanked 0 Times in 0 Posts
Default Re: Another newbie mistake- exo Terra doors

Quote:
Originally Posted by Encyclia View Post
That is always a scary feeling. Sorry that happened. Perfect example of not being able to predict what is going to happen. That sounds like every project I do for the first time...

Whenever I am doing a background and need to set an Exo or ZooMed on its back, I usually just use a blade to slide up under the top molding in the front next to where the hinge is located on each side (depending on the size and brand of tank) and just pry the top molding at the corner up enough to get the little pin on the front hinged glass out and set them aside. They go in a lot easier when I am done and they stay in just fine from then on in my experience.

Mark
I had them supported after pulling the doors out and swung out to the outside. As soon as the latch was released they just fell down. Hit a some of the driftwood sticking out. Thought for sure both doors were cracked!
Reply With Quote
 
Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 06:15 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.