Dendroboard - View Single Post - Twin Sherman Vent 18x18x24's
Dendroboard

Go Back   Dendroboard
Register Blogs FAQ Calendar Mark Forums Read Advertise

Support Our Sponsors
No Threads to Display.

facebook

View Single Post
  #3 (permalink)  
Old 04-16-2019, 12:13 AM
Ravage's Avatar
Ravage Ravage is offline
Member
 
Join Date: Feb 2016
Location: Bailey, CO
Posts: 404
Thanks: 29
Thanked 48 Times in 43 Posts
Default Re: Twin Sherman Vent 18x18x24's

Get a flat, un-glazed tile. Or if you can't find one, get a tile with a fairly flat, un-glazed back. After you cut your glass, put the sheets in the bathtub with a couple of inches of water in it and submerge the glass. Use the tile like an emory board and run it (make sure the tile is wet too) along all cut edges. This will dull the edge and put an end to the cut fingers. I have a grinder, but the old ceramic "sanding" works just as well to dull edges. The grinder allows me to make nifty door handles and curvy stuff when I feel so inclined.
For a buck your fingers will thank you. Glass is gonna cut you- that's just its higher purpose.

Vivs look great!
__________________
There's Bears in these here Woods. Wouldn't have it any other way.
Reply With Quote
 
Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 07:11 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.