Dendroboard - View Single Post - How to build a lid for an octogonal tank
Dendroboard

Go Back   Dendroboard
Register Blogs FAQ Calendar Mark Forums Read Advertise

Support Our Sponsors
No Threads to Display.

facebook

View Single Post
  #1 (permalink)  
Old 11-13-2008, 03:03 PM
jejton jejton is offline
Member
 
Join Date: Sep 2006
Location: Long Island, NY
Posts: 392
Thanks: 0
Thanked 1 Time in 1 Post
Default How to build a lid for an octogonal tank

I recently adopted a Tokay and golden gecko, along with a Cuban, Golden, and White's tree frog. The previous owner kept them all together in a 40 gallon breeder tank for a couple of years without problems. I would prefer to separate the geckos from the frogs ( the frogs can remain together for a bit as they are all currently the same size ). I have a 20 gallon octogonal tank that I would like to setup for the geckos. The problem is I have no lid. Originally I was going to use screen door material but then I realized the joints are only 90 degrees so they wont work. What are my other options? I was thinking to find a glass shop in the area that can cut two pieces of glass, with a hole in each, that I can then silicone to a joint but if I can't, would acrylic/plexiglass work? I dont need a UV light or a heat lamp but I do want a small CF lamp over it for the plants.
__________________
Surinam Cobalt Tincs 0.0.4
Reply With Quote
 
Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 03:02 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.