Dendroboard - View Single Post - new project

Go Back   Dendroboard
Register Blogs FAQ Calendar Mark Forums Read Advertise

Support Our Sponsors
No Threads to Display.


Thread: new project
View Single Post
  #2 (permalink)  
Old 11-04-2007, 02:21 PM
AlexD AlexD is offline
Join Date: Sep 2007
Location: Blacksburg, Virginia
Posts: 363
Thanks: 6
Thanked 6 Times in 3 Posts

Calculating the volume is a little complicated, so stay with me. First, measure one side's length. Using inches will make this easier, because the volume of the water at the end of this explanation is in cubic feet- I assume you meant 600 x 800 cm. Then, using this formula: The fraction 3 on the square root of 3 over 2 quantity raised to the s squared power, with s of course being the side, you can determine the SA of the base. Then, just multiply the base's SA by the height of the tank, 800, and divide the volume of the tank by the volume of a gallon of water, about 0.13 cubic feet. Does that make sense? Probably not, I got carried away.
Reply With Quote
Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 04:44 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.