It's 2 fans actually :P With 120mm fans you can get higher airflow with less noise. So I got 2 that run at like 1500 RPM and flow a decent amount of air and they are almost silent. I'm going to be wiring it up so both fans go to a single connector in a few minutes so I can hear them both running at the same time. One of the fans does sound faster than the other so I'm going to have to use the multimeter to check and make sure it isn't drawing more current than the AC-DC converter can handle. I don't want it overheating and causing a fire now :P
And to solder wire you need a soldering iron (like 15-30$) or soldering gun(about the same price but a tad higher). And then you need solder. If you search online about it you can find more details about it and ways to do it. Now I have done lots of work with electronics so soldering is something I can do quite well. I use an iron because it's a bit easier to handle/use but it takes like 3 minutes to heat up.
|
