Well I got a little more work done.
This is the water feature test! I did run water trough it from the water hose. I figured it would handle about 115GPH. In the process of testing and curing it I cracked a couple of spots that need to be fixed now!
This tank was originally a bearded dragon tank with Sliding screen tops. Here is my solution to sealing it. I found some extruded PVC latice that is held in place with screen spline!
This is a piece of 1/4" Lexan (Polycarbonate) that I had to cut down a little.
There is plenty of work to be done, but it is coming along nicely! Next I am working on the false bottom then next week I will be doing the background.
